Poultry Sheds

Product Details:

Surface Finish

Pre Feb

Material

MS, Steel

Column

Truss

Purlin

Ace cement Sheet

Feature

Easily Assembled

Built Type

Panel Build

Type of Industrial Sheds

Poultry Shed

Product Details:

We are the leading manufacturer of Poultry Farm Sheds and our product is made of good quality. 
On Side Work 
Plus 18% GST 

Additional Information:

• Item Code: 1101307
• Production Capacity: 10000 Birds
• Delivery Time: 20 Days

Product Details:

SunPro Factory Shed Insulation is versatile range of high performance fibre-free flexible reflective insulation for roofs, walls and floors. SunPro fibre-free flexible Factory Shed Insulation offers the following benefits for your building insulation

• Based on reflection means low emissivity (blocks heat and moisture)
• Reflects most of radiation heat (blocks 97% of radiation heat)
• Light Weight, no degradation, lasts life long
• Easy and fast installation, No spacers required
• Environment friendly
• No Wire mesh needed, saves time and money

Our range of Livestock Insulation Foil products include Radiant Barriers or Reflective Barriers such as Woven Sack Lamination With Aluminium Foil, Aluminium Foil - Metalized Film Laminated Non Woven Fabrics, Foil Kraft Insulation Finish, Insulation Aluminum Foil Coated Fiberglass Cloth and Metalized Laminated With Woven Fabrics, Which Used in Below application

• Roof Insulation
• Foil Insulation
• Pre Engineered Building Insulation
• Thermal Insulation Materials
• Under Roof Insulation
• Foil Wrap Insulation
• Aluminium Foil Insulation
• Home Insulation
• Metal Building Insulations materials
• Reflective Barrier film
• Reflective Insulation Material
• Heat Insulation Material
• Radient Barrier FOIL
• HVAC Insulation
• Aluminium Foil for Bubble Insulations
• PE coated Aluminium Foil For Foam Insulations
• Metalized Film for Bubble Insulations
• PE coated METPET Film Foil For Foam Insulations
• Coated Metalized BOPP Film For Insulation Manufacturers
• Livestock Insulation Materials
• Farming Insulation
• Poultry Farm Insulation
• Mobile House Insulation
• Building Insulation
• Factory Shed Insulations
• Insulated Foil For Export Packaging
• Fibreglass Insulations

Heat Insulation Materials for Roof and Wall is light in weight, excellent tear-resistance good puncture resistance excellent water vapour resistance and higher tensile strength. It is easy to handle during construction, anti-aging, peel strength, and printable

Insulation Usage
Heat Insulation Materials for Roof and Wall are used widely to make car cap to Reflective Sunshine in Roof, floor, wall, pack food for heat retaining, medical sanitary, industry agriculture, construction daily-used products such as the agricultural plant covers, roof waterproof material, disposable items for medical and industrial applications, liners for furniture, packing material, shopping bags, suit and garment cover, industrial protective coveralls, garment accessory materials, bed articles, medical and sanitary articles as well as family and hotel consume articles, especially for heat insulation, thermal insulation and construction and other fields.

Additional Information:

• Item Code: 156098
• Production Capacity: 10000
• Delivery Time: 30 to 35 Days
• AMS ENGINEERING

Additional Information:

• Item Code: 1101308
• Production Capacity: 20000
• Delivery Time: 45 Days
• Packaging Details: Metalized film / Al Foil Laminated non woven fabric used in flexible packaging, waterproof material, decorative material, foodstuff packaging, barrier material, Low heat shrinkage, well tensile strength, aluminium coating is well-proportioned has very high lusted degree, light reflectivity reach 98%, suitable for yarn, cling packaging, cosmetic packaging.

Product Details:

On Side Work 
Plus 18% GST

Additional Information:

• Item Code: 1101309
• Production Capacity: 11000
• Delivery Time: 15 Days

Product Details:

Additional Information:

• Item Code: 1101310
• Production Capacity: 7000

Product Details:

Additional Information:

• Item Code: 1101311
• Production Capacity: 8000

Product Details:

SunPro Factory Shed Insulation is versatile range of high performance fibre-free flexible reflective insulation for roofs, walls and floors. SunPro fibre-free flexible Factory Shed Insulation offers the following benefits for your building insulation

• Based on reflection means low emissivity (blocks heat and moisture)
• Reflects most of radiation heat (blocks 97% of radiation heat)
• Light Weight, no degradation, lasts life long
• Easy and fast installation, No spacers required
• Environment friendly
• No Wire mesh needed, saves time and money

Our range of Livestock Insulation Foil products include Radiant Barriers or Reflective Barriers such as Woven Sack Lamination With Aluminium Foil, Aluminium Foil - Metalized Film Laminated Non Woven Fabrics, Foil Kraft Insulation Finish, Insulation Aluminum Foil Coated Fiberglass Cloth and Metalized Laminated With Woven Fabrics, Which Used in Below application

• Roof Insulation
• Reflective Insulation Material
• Heat Insulation Material
• Radient Barrier FOIL
• HVAC Insulation
• Aluminium Foil for Bubble Insulations
• PE coated Aluminium Foil For Foam Insulations
• Metalized Film for Bubble Insulations
• PE coated METPET Film Foil For Foam Insulations
• Coated Metalized BOPP Film For Insulation Manufacturers
• Livestock Insulation Materials
• Farming Insulation
• Poultry Farm Insulation
• Mobile House Insulation
• Building Insulation
• Factory Shed Insulations
• Insulated Foil For Export Packaging
• Fibreglass Insulations

Heat Insulation Materials for Roof and Wall is light in weight, excellent tear-resistance good puncture resistance excellent water vapour resistance and higher tensile strength. It is easy to handle during construction, anti-aging, peel strength, and printable

Insulation Usage
Heat Insulation Materials for Roof and Wall are used widely to make car cap to Reflective Sunshine in Roof, floor, wall, pack food for heat retaining, medical sanitary, industry agriculture, construction daily-used products such as the agricultural plant covers, roof waterproof material, disposable items for medical and industrial applications, liners for furniture, packing material, shopping bags, suit and garment cover, industrial protective coveralls, garment accessory materials, bed articles, medical and sanitary articles as well as family and hotel consume articles, especially for heat insulation, thermal insulation and construction and other fields.

Additional Information:

• Item Code: 156098
• Production Capacity: 10000
• Delivery Time: 30 
• AMS ENGINEERING

Additional Information:

• Item Code: 1101315

Product Details:

Additional Information:

• Item Code: 1101563
• Production Capacity: 12000
• Delivery Time: 25 Days

Product Details:

Specifications for construction of a Broiler farm • House Orientation (Direction): The poultry house should be located in such a way that long axis is in east-west direction. This will prevent the direct sunshine over the birds. • Size : Each broiler require one square foot of floor space under deep-litter system of rearing. So the size of the house depends on the number of birds to be reared.

4. • Length • The length of the house can be of any extent. • The number of birds reared and availability of the land determines the length of poultry house. • If the width of the shed is more than 25 feet, ridge ventilation at the middle line of the roof top with proper overhang is a must. • Hot air and obnoxious gases which are lighter than air move upward and escape through ridge ventilation.

5. • Height The height of the sides from foundation to the roof line should be 6 to 7 feet height, and at the centre 10 to 12 feet. • Foundation Good foundation is essential to prevent seepage of water into the poultry sheds. The foundation of the house should of concrete with 1 to 1.5 feet below the surface and 1 to 1.5 feet above the ground level.

6. • Doors The door must be open outside in case of deep-litter poultry houses. The size of door is preferably 6 x 2.5 feet. At the entry, a foot bath should be constructed to fill with a disinfectant. • Side walls The side wall should be of 2-2.5 feet height, This side wall protects the bird during rainy days or chill climate and also provides sufficient ventilation. In case of cage houses, no side wall is needed.

7. • Roof The roof of the poultry house may be thatched, tiled, asbestos or concrete one depending upon the cost involvement. Different types of roofs are Shed, Gable, half-monitor, full- monitor (Monitor), Flat concrete, Gambrel, Gothic etc. Gable type is mostly preferred in tropical countries like India. • Overhang The overhang of the roof should not be less than 3.5 feet in order to prevent the entry of rain water into the shed. • Lighting Light should be provided at 7-8 feet above the ground level and must be hanged from ceiling. If incandescent bulbs are used, the interval between two bulbs is 10 feet. In case of fluorescent lights (tube lights) the interval is 15 feet.

8. Foot bath • Footbaths should be on a solid surface close to the point of entry to the site and building to be entered. Commonly used disinfectants used in a foot bath: • Glutaraldehyde + Formaldehyde disinfectants, • Glutaraldehyde + quaternary ammonium salts, • Iodophores.

9. Foot Bathat the Entrancein a BroilerShed

10. DRINKERS • The most commonly used systems are the Bell drinker and the Nipple drinker, although troughs are also used. . • Bell drinkers : supply open water, and need regular maintenance to avoid pollution and spilling. • A minimum of 8-9 drinkers per 1000 birds should be provided. • Maximum distance between bird and drinker should be 2m. For the first 3-4 days, additional mini-drinkers should be provided.

11. • Nipple drinkers: Especially the so-called high- pressure nipple systems that do not need drip cups, are getting more and more popular. • They require lower maintenance, give better water quality and result in dry litter due to decreased water spilling. • Under normal conditions, 1 nipple per 12 birds should be available. • In warm conditions or when birds have gr

13. PARAPET WALL Parapet walls are useful in making partitions in a poultry house, and they should be of a minimum 0f 1.5 to 2 feet height in a broiler farm.

14. Chain Links and Netting In Broiler Farm for fencing     

Additional Information:

• Item Code: P-6169
• Production Capacity: 10000
• Delivery Time: 25 Days
• Packaging Details: Column Size 3 Inch by 3 Inch Square Tube Truss 2 Inch by 2 Inch Square Tube Purling 3 Inch by 1.5 Inch Square Tube Ace Cement Sheet Will be Fitting

Product Details:

Product Details:

Product Details:

Column

Truss

Praline

Ace cement sheet

· Square Pipe Shed

Column 3 inch square Pipe

Truss 2 inch square Pipe

3 inch by 1.5 inch Square Pipe Praline

Additional Information:

• Item Code: 1101791
• Production Capacity: 4000
• Delivery Time: 20 days
• Packaging Details: Column Truss Praline ¿¿¿ Ace cement sheet Square Pipe Shed Column 3 inch square Pipe Truss 2 inch square Pipe 3 inch by 1.5 inch Square Pipe Praline

Product Details:

Additional Information:

• Item Code: 0674
• Production Capacity: 30000
• Delivery Time: 9th Week

Product Details:

Product Details:

Specifications for construction of a Broiler farm • House Orientation (Direction): The poultry house should be located in such a way that long axis is in east-west direction. This will prevent the direct sunshine over the birds. • Size : Each broiler require one square foot of floor space under deep-litter system of rearing. So the size of the house depends on the number of birds to be reared.

4. • Length • The length of the house can be of any extent. • The number of birds reared and availability of the land determines the length of poultry house. • If the width of the shed is more than 25 feet, ridge ventilation at the middle line of the roof top with proper overhang is a must. • Hot air and obnoxious gases which are lighter than air move upward and escape through ridge ventilation.

5. • Height The height of the sides from foundation to the roof line should be 6 to 7 feet height, and at the centre 10 to 12 feet. • Foundation Good foundation is essential to prevent seepage of water into the poultry sheds. The foundation of the house should of concrete with 1 to 1.5 feet below the surface and 1 to 1.5 feet above the ground level.

6. • Doors The door must be open outside in case of deep-litter poultry houses. The size of door is preferably 6 x 2.5 feet. At the entry, a foot bath should be constructed to fill with a disinfectant. • Side walls The side wall should be of 2-2.5 feet height, This side wall protects the bird during rainy days or chill climate and also provides sufficient ventilation. In case of cage houses, no side wall is needed.

7. • Roof The roof of the poultry house may be thatched, tiled, asbestos or concrete one depending upon the cost involvement. Different types of roofs are Shed, Gable, half-monitor, full- monitor (Monitor), Flat concrete, Gambrel, Gothic etc. Gable type is mostly preferred in tropical countries like India. • Overhang The overhang of the roof should not be less than 3.5 feet in order to prevent the entry of rain water into the shed. • Lighting Light should be provided at 7-8 feet above the ground level and must be hanged from ceiling. If incandescent bulbs are used, the interval between two bulbs is 10 feet. In case of fluorescent lights (tube lights) the interval is 15 feet.

8. Foot bath • Footbaths should be on a solid surface close to the point of entry to the site and building to be entered. Commonly used disinfectants used in a foot bath: • Glutaraldehyde + Formaldehyde disinfectants, • Glutaraldehyde + quaternary ammonium salts, • Iodophores.

9. Foot Bathat the Entrancein a BroilerShed

10. DRINKERS • The most commonly used systems are the Bell drinker and the Nipple drinker, although troughs are also used. . • Bell drinkers : supply open water, and need regular maintenance to avoid pollution and spilling. • A minimum of 8-9 drinkers per 1000 birds should be provided. • Maximum distance between bird and drinker should be 2m. For the first 3-4 days, additional mini-drinkers should be provided.

11. • Nipple drinkers: Especially the so-called high- pressure nipple systems that do not need drip cups, are getting more and more popular. • They require lower maintenance, give better water quality and result in dry litter due to decreased water spilling. • Under normal conditions, 1 nipple per 12 birds should be available. • In warm conditions or when birds have gr

13. PARAPET WALL Parapet walls are useful in making partitions in a poultry house, and they should be of a minimum 0f 1.5 to 2 feet height in a broiler farm.

14. Chain Links and Netting In Broiler Farm for fencing     

Additional Information:

• Item Code: MS107-09-2021
• Production Capacity: 12000
• Delivery Time: 45 Days
• Packaging Details: Specifications for construction of a Broiler farm • House Orientation (Direction): The poultry house should be located in such a way that long axis is in east-west direction. This will prevent the direct sunshine over the birds. • Size : Each broiler require one square foot of floor space under deep-litter system of rearing. So the size of the house depends on the number of birds to be reared. 4. • Length • The length of the house can be of any extent. • The number of birds reared and availability of the land determines the length of poultry house. • If the width of the shed is more than 25 feet, ridge ventilation at the middle line of the roof top with proper overhang is a must. • Hot air and obnoxious gases which are lighter than air move upward and escape through ridge ventilation. 5. • Height The height of the sides from foundation to the roof line should be 6 to 7 feet height, and at the centre 10 to 12 feet. • Foundation Good foundation is essential to prevent seepage of water into the poultry sheds. The foundation of the house should of concrete with 1 to 1.5 feet below the surface and 1 to 1.5 feet above the ground level. 6. • Doors The door must be open outside in case of deep-litter poultry houses. The size of door is preferably 6 x 2.5 feet. At the entry, a foot bath should be constructed to fill with a disinfectant. • Side walls The side wall should be of 2-2.5 feet height, This side wall protects the bird during rainy days or chill climate and also provides sufficient ventilation. In case of cage houses, no side wall is needed. 7. • Roof The roof of the poultry house may be thatched, tiled, asbestos or concrete one depending upon the cost involvement. Different types of roofs are Shed, Gable, half-monitor, full- monitor (Monitor), Flat concrete, Gambrel, Gothic etc. Gable type is mostly preferred in tropical countries like India. • Overhang The overhang of the roof should not be less than 3.5 feet in order to prevent the entry of rain water into the she